THERMOSTAT PROGRAMMABLE 32 TO 104DEG F 5

contact@rmadden.com | 806-797-4251

Item Code: TCPHP01
Brand: RCD Parts
Unit Size: 1

Description

The Carrier Comfort series of thermostats consists of programmable and non-programmable air conditioner and heat pump controls. These units feature non-mercury, non-lead based electronic controls built into a subtle, slim plastic enclosure.

Features Tech Specs

Features

Touch-N-Go programmability
RC/RH power compatible
When automatically changeover mode is selected, a change from heat to cool (or vice versa) will not occur until an opposite mode demand has existed for 20 min, when a set point is changed automatically changeover timing is ignored to allow the heating/cooling equipment to respond quickly
Non-volatile memory to retain settings during a power outage
Keypad lockout
Continuous display backlighting configurable
Configurable set point limits
The heating/cooling set point range is from 50 to 90 deg F
Selectable range of 1 to 6 deg F is enforced between heating and cooling desired temperatures
5 min compressor time guard prevents the compressor from starting unless it has been off for at least 5 min
Room temperature may be deliberately offset by up to 5 deg F in either direction
-40 to 134 deg F storage temperature
95% non-condensing relative humidity
Standard 18 to 22 ga, local wiring codes supercede wire required
When thermostat is controlling a heat pump and emergency heat is selected, all Y signals are locked out, and W becomes energized upon a call for heat

Tech Specs

Brand	RCD Parts
Control Range	32 to 104 deg F
Dimensions	5.1 in W x 1.1 in D x 4.1 in H
Domestic/Import	Domestic
Mounting Type	Horizontal J-Box
Number of Stages	5
Power Source	Battery
Programs per Week	5/2 Days
Series	Comfort
Stages Cool	2
Stages Heat	3
System Switching	Heat/Cool
Temperature Settings per Day	2 to 4
Thermostat Type	Programmable
Voltage Rating	24 VAC