contact@rmadden.com | 806-797-4251

UNIT 90000BTU/HR 11.2 92000BTU/HR 11.8

  • Item Code: CAS091LGA0A00A
  • Unit Size: 1

Description

The Day and Night CAS series outdoor units matched with the FAS and FHS series indoor air handlers provide a variety of HVAC application options. Whether its lowest first cost with the single circuit models or superior part load performance from two stages of cooling with the CAS air conditioner series these units are designed for long, dependable operation for rooftop or on-the-ground installation. All models use environmentally sound R410A refrigerant. Together, they create a reliable split system that provides easy solutions to a wide range of commercial HVAC needs.

Features

Back To Top
    • Built to last, easy to install and service
    • 1-stage cooling capacity control
    • Round copper tube aluminum plate fin (RTPF) condenser coils
    • Brass suction and liquid line service valves
    • Full perimeter base rail with built-in rigging adapters and fork truck slots
    • Galvanized steel cabinet with pre-painted exterior panels and primer-coated interior panels tested to 500 hr salt spray protection
    • Fully hermetic scroll compressor with crankcase heater
    • Compressor mounted on independent vibration isolators
    • Comfort Alert diagnostic board: LED GO-NO-GO and fault code, built in time guard anti-short cycle, phase protection, fault code retention and logic low volt compressor contactor protector
    • All units have high and low pressure switches
    • Direct drive permanently lubricated condenser fan motors
    • Newly-designed terminal board facilitates simple safety circuit troubleshooting and simplified control box arrangement
    • Outdoor temperature cooling operation range up to 125 deg F and down to 40 deg F using winter start kit
    • All units factory run tested
    • 1-circuit, 2-stage refrigerant system
    • Standard electro-mechanical base unit controls

Tech Specs

Back To Top
Brand Day & Night
Control Type TXV
Cooling Capacity 92000 Btu/hr
Dimensions 59.38 in W x 45.88 in D x 42.38 in H
Discharge Line Size 1/2 in
Domestic/Import Import
EER Rating 11.2
Flow Rate 6000 cfm
Fuse Size 25 A
IEER Rating 11.8
Material Galvanized Steel
Maximum Piping Length 25 ft
Motor HP 1/4 hp
Motor RPM 1100 rpm
Motor Type Direct Drive Condenser
Nominal Capacity 90000 Btu/hr
Power Source 460 VAC, 8.2 kW, 3 ph, 60 Hz
Refrigerant Type R-410A
Series CAS
Sound Level 85 dBA
Suction Line Size 1-1/8 in
Temperature Rating 40 to 125 deg F
Type Standard Efficiency

Documents & Guides

Back To Top
Instruction/Installation Manual
Warranty Information
Specification Sheet
Catalog

Related Items